產品詳情
NEOFLON FEP NP-112 Daikin 聚全氟乙丙烯（氟化乙烯丙烯共聚物）
FEP
Daikin FEP (Fluorinated Ethylene Propylene copolymer) is a melt processible fluoropolymer. Although it is lower melting than PTFE, it still maintains a continuous service temperature of 200 Deg C. Because FEP is fully fluorinated like PTFE, it is extremely inert, has excellent electrical properties, high chemical stability, low friction, excellent long term weathering and very good low temperature properties. It is used in high speed wire insulation, cable jacketing, extruded film, blown film, sheet extrusion, tubing, heat shrinkable tubing, catheters, molded parts, and equipment and pipe linings. Daikin provides a wide range of melt flow indexes to choose from, as well as standard copolymer grades and modified copolymer grades that have improved mechanical properties.
FEP 產品手冊
NP-20
NP-30
NP-40
NP-101
NP-102
NP-112
NP-120
NP-130
NP-1108
NP-1109
NP-3180
Fluoropolymers
Fluoropolymers are widely used in automotives, aerospace, semiconductors, electronics and common household appliances because of their unique non-adhesive and low friction properties as well as their superior heat, chemical and weather resistance and superior electrical properties compared with the other polymers.
NEOFLON FEP NP-112 Daikin 聚全氟乙丙烯（氟化乙烯丙烯共聚物）
FEP（氟化乙烯丙烯）樹脂的形態(tài)呈顆粒狀，專用于增強涂層、熱熔擠出和浸漬應用。它們還可用于傳統的熱熔擠出工藝和注塑、模壓、傳遞模塑和吹塑工藝。
加工
較高的熔體強度和出色的涂布能力，有利于使用大型模具和涂布機床來提高生產率。使用具有更大長徑比的擠出機料筒，可以提供足夠的停留時間來熔化這些高溫聚合物，從而滿足高的生產效率。往復螺桿式注塑機最為高效。建議制造商采用耐腐蝕金屬制造可能與熔融樹脂接觸的所有設備部件。
FEP 樹脂具有卓越的耐化學腐蝕性和電氣性能，并且適用于高達 200℃ (392°F) 的工作溫度。Teflon™ FEP 樹脂還具有獨特的阻燃性和領先的低溫韌性。
注意事項：
應避免在高于420℃時加工，以防分解產生有毒氣體。
包裝、運輸、貯存：
1、封裝在兩層塑料內袋中，每袋凈重25kg，每袋均附有合格證。
2、應貯存在清潔、干燥、陰涼、避光的環(huán)境中，防止雜質混入。
3、無毒、不燃、不爆、無腐蝕，按非危險品運輸。
